Vac error fixer

[Avell]

Программа фиксящая ошибку вак, как понятно из названия.
Я знаю что она очень старая, но вдруг ньюкамерам надо :SMOrc::SMOrc:

VT

DL (Если вы из Рашки вам нужен VPN)



В кнопках запутаться не должны, их не много


Жмёте FIX

Тут жмёте на кнопку под стрелкой и потом проверяете файлы каэс

Всё, теперь вы ПрОгРаМмИсТ

 

[Solncev]

Был бы диз - поставил бы.
1) Не указал кредиты, мог бы того же Омлета указать.
2) Вторая фотка сразу неправильно, т.к. при удалении pak файлов тебе придётся их заново качать, и ты не сможешь сразу через 2 минуты зайти обратно. Только минут через 10-30(смотря на скорость интернета)
3) Любой ньюкамер пойдёт в соц.сеть "интернет" и будет искать там, так что это бред.

epeClown: epeClown:

 

[deepblue1974]

"Yea, I had that issue on my mining rig a while back and I think I figured out a solution. Try disabling the power save feature in the BIOS and see if it does the trick. That usually fixes the VAC error on my setup."

 

[Кондаков Вадим]

"just had a vacuum error on my rig and a simple shutdown and restart fixed it. anyone else had this issue? thought i'd share, might help others with the same problem"

 

[Akira1]

"Lol, just updated my GPU drivers and my Vac error's gone. Been experiencing it for a few days now, was getting pretty frustrating. Definitely mark this thread as solved"

 

[Mordahin]

"Hey guys, just tried that method posted by @CryptoCatalyst and it worked for me. The steps to fix the VAC error were pretty straightforward. Hopefully, it works for y'all too"

 

[anjlynx]

"Lol don't think a simple Vac error fixer is gonna save your rigs guys, usually means something else is fishy. Have you guys checked your GPU bios and drivers? Also, some miner software has built-in error reporting try that out."

 

[StaPash]

"Just had the same issue with my VAC miner last week, tried updating the firmware and restarting the whole system. Worked like a charm, now I'm back up to 50 MH/s. Has anyone else had success with the latest patch?"

 

[Sergey St.]

"Dude, I've been having the same issue with the VAC error on my mining rig, but I managed to resolve it by updating my GPU drivers. Since then, no more errors and my mining has been smooth sailing. Anyone else have luck with this fix?"

 

[Маркова Ольга]

"Hey guys, I was having similar issues with my ASIC's vacuum fan, but then I cleaned the filter and it's been running smooth ever since. Make sure to turn it off first and use compressed air to avoid damaging the electronics. Worked like a charm for me"

 

[free_max]

I've had that Vac error on my miner before and fixed it by updating the software and firmware on the rig. Also, make sure the power supply is delivering the stable voltage and wattage the miner needs. Sometimes a simple reset of the miner can also do the trick.

 

[gary1965]

"Hey, I had the same vac error on my ASIC rig. I cleared the error by shutting it down, letting it sit for a few minutes, and then restarted the miner. It seems to have worked, but I'm still curious if anyone else has a better fix"

 

[Ruwa]

"Lol what's the vac error you're getting? I've seen some people fix it by updating their wallet's firmware, but I've also heard of people having success with a simple soft reset. Anyone else tried these methods?"

 

[nikatnetz]

"Dude, I just had the same issue with my Ledger device and found a fix - try restarting it in safety mode, then let it update itself. Worked like a charm for me. Hope this helps!"